Description
Axial wall fan
Parsa Fan Company is a manufacturer of industrial axial fans, one of which is a wall axial fan. They can be ordered according to customer needs.
Reputable companies in the world such as Zilabag and domestic companies such as DAMANDE produce the best wall fans. According to the knowledge and technology we have, we produce and offer the Iranianized and standard version of this product.
فن آکسیال دیواری پاریا فن
Types of axial wall fans ParsaFan
-
Industrial axial fan
-
Semi-industrial axial fan
-
Home axial fan
This type of fan is generally used for clean air conditioning. Parsafan axial wall fan has the ability to suck air and also to bring fresh air into the environment. If there is a suitable wall or window for installation, you can use this fan model for ambient air conditioning.
شماتیک فن آکسیال دیواری پارسا فن
هواکش آکسیال دیواری پارسا فن
Factors affecting the production capacity of wall axial fan
- Engine speed
- Impeller shape (angle)
- Impeller diameter
- Number of blades
- Elevation of the fan installation location above sea level (directly related to air density or concentration.)
Things to consider before installing ParsaFan wall axial fans:
- Volume of the fan allowed
- The height of the fan installation site above sea level (affects the density of air passing through the fan.)
- Humidity and installation location of axial fan
- Humidity and temperature of gases entering the fan
- Existence of dust or alkaline or acidic gases
- Continuous fan operation time of 24 hours or other special conditions
Parsafan wall axial fan function
Types of ParsaFan Wall Axial Fan Power Transmission System
- Direct coupling
- belt pulley
All kinds of axial wall fan impellers of ParsaFan Ventilation Company
-
aluminium
-
Plastic
-
Steel
Advantages of using Parsafan Wall Axial Ventilation fan
-
This model of Parsafan has a great range in terms of power and size. The range is such that a model of wall axial fan is available in the market for almost all needs. You can choose the best model from our company according to your needs.
-
Due to the installation location of ParsaFan Ventilation wall ventilator, the possibility of being exposed to rain and dust is very high. There are two solutions to this problem. At first, you can use compartments to put the fan inside or make waterproof models available in the market. The degree of waterproofness of the fan can also vary, and you can choose the right model according to the IP standard, which is for water and dust penetration.
-
Parsa Fan wall axial fan uses the simplest design among other fans. For this reason, the energy consumption of this model of fans is very low, and if you choose the right model and no pressure is applied to the fan, you can be sure of the long life of the axial wall fan.
Application of ParsaFan wall axial fan
-
Air conditioning of factories and workshops
-
Air conditioning of stores and shopping malls
-
Air conditioning of stadiums and sports stadiums
-
Home air conditioning (kitchen, bathroom and toilet)
-
Air conditioning of cold stores and greenhouses
Technical and structural specifications of ParsaFan axial wall ventilators:
-
Impeller: In four different models and in different sizes from 250 to 1400 mm in diameter and with full dynamic and static balance
-
Aeration capacity: from 100 to 50,000 cubic meters per hour depending on the size of the ventilator
-
Static pressure: from 5 to 150 Pascals depending on the size of the ventilator
-
Ventilation material: The material of the sheet used in these ventilators is steel sheet (st-37), galvanized sheet, stainless steel sheet and abrasion and corrosion resistant sheets.
-
Electric motors: The electric motors used in axial wall fans produced by this company are from the reputable brand of Motogen Tabriz and are of industrial type and have thermal class F and protection class IP 54 (IP 55 in some capacities). European valid can also be installed on these fans.
-
Power transmission system: The power transmission system in axial wall fans produced by this company is in the form of direct connection (Direct Drive) and belt connection (Belt Drive) (for wall axial fans with impeller diameter more than 1000 mm) which is with Paying attention to the conditions requested by esteemed customers is selected by this company.